THYRISTOR REGULATORS

อุปกรณ์ที่ใช้ควบคุม Voltage

อุปกรณ์ที่ใช้ควบคุม Voltage ที่จ่ายให้กับฮีตเตอร์ซึ่งเป็นตัวกำเนิดความร้อน โดยไม่มีการตัดกระแสไฟฟ้าที่จ่ายให้กับฮีตเตอร์
ฮีตเตอร์จะร้อนอยู่ตลอดเวลา แต่จะร้อนมากหรือน้อยขึ้นอยู่กับ ตัว Temperature Transmitter ที่รับค่าอุณหภูมิมาจากหัววัดอีกที Out put ของ Temperature Transmitter จะเป็นค่าไฟฟ้ากระแสตรง ตามมาตรฐานของการส่งค่าโพรเซส (Process value)

PRODUCT / MODEL

Single-Phase Thyristor Regulators

Model : JU Series

Features

Small and lightweight thyristor regulators for single-phase loads are characterized with high panel installation density. Two control systems, a phase-angle firing system and a zero-cross firing system, are built in and can be changed by remote contacts signal

Single-Phase Thyristor Regulators

Model : JB Series

Features

Compact and relatively low-priced single-phase thyristor regulator (no feedback). Rated voltage 20A to 100A, six types are available for your convenience and used readily.

  • Compact all-in-one type, so it doesn’t take much space to install and wiring is also simple.
  • Phase-angle firing control and zero-cross firing control can be switched.
  • Controllability is improved by soft start, soft up-down, soft start at recovery from momentary interruption.
  • Frequency auto distinguish function, gradient setting function, and lower-limit setting function are equipped.

Three-Phase Thyristor Regulators

Model : JW Series

Features

JW Series is compact lightweight three-phase control thyristor regulators with high-density instrumentation.

  • Control methods are divided into two ways, the phase control & zero-cross control.
  • In the phase control systems, a type with the voltage, current & power feedback control types and without feedbacks type are available according to the heater used characteristics .
  • Advanced three-phase control is based on 6-arm control & fine control setting from communication unit.
  • Remote control & data monitoring is available by connecting to a host unit.

Control Motor

Model : CMC Series

Features

This is a control motor designed by combining a single-phase condenser starting induction motor with a reduction gear mechanism, cam, microswitches, control level, etc. It is used in combination with a controller in order to control valves, dampers, burners, etc.

SKILLFULL INSTALLATION TEAM

มีทีมงานติดตั้งมืออาชีพ

ทีมงานติดตั้งมืออาชีพที่มากด้วยประสบการณ์ สามารถติดตั้งงานได้อย่างเรียบร้อย เป็นระบบ เพื่อป้องกันความล่าช้า หรือความผิดพลาดที่เกิดขึ้นจากการติดตั้ง

AFTER-SALE

SERVICE

มีบริการหลังการขาย

ไม่ว่าจะเป็นเรื่องของการ MAINTENANCE หรือการแก้ไขปัญหาหน้างาน เรามีทีมงานที่ได้รับการฝึกฝนให้ทำงานอย่างเป็นระบบ วิเคราะห์และแก้ไขปัญหาได้อย่างตรงจุด บริการได้รวดเร็วและมีมาตรฐาน

CALIBRATION

SERVICE

มีบริการสอบเทียบ

มีบริการสอบเทียบเครื่องมือ วัดจากโรงงาน

ผู้ผลิต และห้องปฏิบัติการตามมาตรฐาน